論文で伝える研究成果

Comparative study on the wear behavior of Ti-6Al-4V and Ti-12Mo-1Fe alloys

J.Han, D.Kim, J.Hwang, D.Lee, Se-Eun Shin, S.-J. Lee^*

Tribology International · 226, 112509 (2027)

Nucleation-controlled electrodeposition to achieve homogeneous phase and elemental composition in NiFe alloy films

J.H.Lim, J.Lee, I.G.Kim, Y.-I.Kim, J.Jeon, J.Kwon, H.Shin, Y.Kim, H.Song, S.Nam, Y.B.Park, Se-Eun Shin, H.W.Jang, S.H.Park

Surface and Coatings Technology · 540, 134037 (2026)

Annealing Phenomena in Electrodeposited Invar Foils

I.Kim, Se-Eun Shin^*, B. Yoo, S. Choi, S.-J. Lee, Y. Park^*

Materials Science and Engineering A · 976, 151003 (2026)

Tailoring nano-carbon/IN718 interfaces via specific surface area for synergistic control of thermal expansion and conductivity

D.Kim, H.Pak, Se-Eun Shin^*

Materials Research Letter (2026)

Synergistic corrosion Inhibition of interfacially engineered Al-O/CNT composites through Al-O-C chemical anchoring

S.Kim, S.Gong, J.Hwang, B.Kim, D.Bae, Se-Eun Shin^*

npj Materials Degradation · 10(1), 121 (2026)

Refinement of carbide networks and microstructural evolution in gas-atomized D2 tool steel via hot-isostatic pressing and quenching–tempering

D.Ahn, S.Park, Se-Eun Shin^*

Korean Journal of Metals and Materials (2026)

Overcoming Silicon Embrittlement in Ultra-High-Si β-21S Composites via Solution Treatment

J.Liu, H.Ding, Z. Wang, X. Cui, D. Chen, K. Jiang, T. Zhang, Z. Xiao, C. Long, X. Ren, Se-Eun Shin, Zhennian Wange^*, Mao Liu^*

Materials Science and Engineering A · 971, 150573 (2026)

Microstructural evolution and enhanced tribological performance of multi-component Al-Fe-Mn-Cu Alloys: A Comparative study between conventional casting and laser powder bed fusion

S.Lim, D.Kim, N.Takata, Se-Eun Shin^*

Journal of Materials Research and Technology · 43 (2026)

Enhancing aluminum crossover alloy fabrication via powder metallurgy

D.Ahn, S.Gong, S.Kim, Se-Eun Shin^*

Materials & Design · 264, 115825 (2026)

Chemically driven interfacial bonding via oxygen for strengthening aluminum matrix composites reinforced with multi-walled carbon nanotubes

M.Joo, D.Bae, Se-Eun Shin^*

Journal of Materials Research and Technology · 41, 7779 (2026)

AI-driven generative prediction and optimization of heat treatment for SLMed Ti-6Al-4V/EB nanocomposites

J. Kim, S.Gong, C. Shim, S.Jeong^*, Se-Eun Shin^*

Metals and Materials International (2026)

Saccharin-controlled electrodeposition of ultra-thin Fe-Ni foils for low CTE

J.Kim, IG KIM, YB Park, Se-Eun Shin^*

Metals and Materials International (2026)

Effect of aging temperature on the wear behavior of maraging 18Ni-300 Steel manufactured by laser powder bed fusion

S. Lim, S.Gong, N. Takata, M.Kobashi, Se-Eun Shin^*

Wear, 206117 (2025)

Dependence of friction-stir welding on mechanism of hydrogen embrittlement in medium-Mn steel with triplex-phase microstructure

K. Kwon, S. Gong, H. Kim, H. Fujii, Se-Eun Shin, Seung-Joon Lee^*

Acta Materialia · 292, 121059 (2025)

Al addition-enabled enhancement of wear resistance through adhesion of oxides in AISI4340 steel

D.Kim, S.Gong, E.Kim

Corrosion behavior of SLMed Ti6Al4V-Equine Bone nanocomposites

S. Kim, Se-Eun Shin^*

Korean Journal of Metals and Materials (2024)

Hot deformation characteristics and dynamic recrystallization behaviors of adamite cast steel for work rolls in hot rolling

Y. An, Se-Eun Shin, G. Cho, D.Kim, J. Jeon^*

Metallurgia Italiana (2024)

Effect of Anisotropy on the Wear Behavior of Aging-treated LPBF 18Ni-Maraging Steel

Seung On Lim, Se-Eun Shin^*

Journal of Powder Materials (2024)